Controller Cards - AMCC/3ware - 3WARE 9650SE-12ML Kit SATAII

Controller Cards > AMCC/3ware > 3WARE 9650SE-12ML Kit SATAII

3WARE 9650SE-12ML Kit SATAII

PCI Express to Serial ATA II Hardware RAID Controllers Featuring
Red Hot RAID 6
3ware® 9650SE

AMCC's 3ware 9650SE SATA II hardware RAID controllers deliver industry-leading RAID 6 and RAID 5 performance, robust fault tolerance, and multi-terabyte capacities. A PCI Express host interface, Multi-lane™ connectivity, StorSwitch™ architecture and sophisticated SATA II features drive this unrivaled performance.

The Best Keeps Getting Better
The 3ware 9650SE PCI Express to SATA II RAID cont

$ 752.99 Back
Quantity:

Specification

  * Mfr Part Number: 9650SE-12ML KIT
  * Features:
     o 8th-generation StorSwitch non-blocking switched architecture
     o On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
     o Bootable array support for greater fault tolerance
     o Variable stripe size for performance tuning by application
     o 64-bit LBA support
     o ATA pass-through mode support
     o 256MB DDR2-533 memory with ECC protection (see table below)
     o 32 pooled DMA channels
     o Complete configuration management suite:
        + 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool
        + 3ware Disk Manager 2 (3DM2) - browser-based management tool
        + Command Line Interface (CLI) - scriptable configuration tool
     o SNMP support
     o SMTP support for email/pager notification
     o ATA/6 and Out of band (OOB) staggered drive spin-up support
     o Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN
o Battery Backup Unit (BBU) support
     o Multiple logical unit sizes and RAID levels on one card
     o Multiple card support within a system for large storage requirements
     o Hot-swap and hot-spare support for data availability
     o Dynamic sector repair for robust data protection
     o S.M.A.R.T. disk drive monitoring for reliability
     o Emergency Flash Recovery protects against failed firmware upgrade
     o Drive activity LED support
  o Online Capacity Expansion and RAID Level Migration
     o Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal
     o Drive insertion and removal notification
     o Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
     o Chassis Control Unit for enclosure management via I2C
  * Port: 12x SATA, Serial ATA 2.6 Specification support
  * Host Interface: PCI Express x8, PCI Express 1.1 compliant
  * Raid Levels: 0, 1, 5, 6, 10, 50, Single Disk, JBOD
  * Onboard Memory: 256MB DDR2-533
  * Connector Type: Multi-lane
  * BBU Support: Yes
  * BIOS PnP (plug and play) and BBS (BIOS boot specification) support
  * Power Requirements: 18W maximum